One of the important points at the dog's institution is the arrangement of its dwelling. Much in this regard depends on the type of your housing (private house or apartment), and from the breed of your pet. Let us dwell on the most common types of "houses" for dogs.

Instruction

Wrinking the dog, you must immediately decide: where will it be most of the time? If you live in the apartment, then this is understandable and so. In this case, you need to choose a place in to accommodate the "house" of the four-legged friend. It is very important that the dwelling of the dog is not on the draft. Even low temperatures are not as afraid of animal, like through wind. Therefore, do not place housing on the go, near the doors or windows. Try to be fenced off by some overall furniture item.

The house for an apartment itself can be quite diverse. Today, any large pet store will delight the dog's owner with a great choice: from simple topchairs to houses with already equipped underlying and having several branches.

But if you live in a private house and a dwelling for your dogs are intended to post on the street (in the courtyard, for example), then in this case the accommodation is your pet you can independently. The main type of street house for a dog is a booth or a loaf. Holding out its size, replicate from the growth of your PSA, the length, height of the withers and widths in the shoulders. In the future, the dwelling dog should feel freely and not be crammed - it should be able to lie down, completely stretching.

A tree is used as a material for a coneer - a good thermal insulation material, an environmental clean.

The coneer itself can be divided into three parts: flooring (floor), box (walls) and roof. Start from the floor. It is important to fit the boards in such a way that there are no cracks between them. At the same time, the dog should not get stuck with claws in the places of BRUSEV.

A four-stranded box is put on the floor. Walls must be two-layer. The space between the inner and the outer part needs to be insulated with thermal insulation materials, for example, packles. Again, check the walls to do.

When the frame will be ready, put it on the bars so that the booth is towers in a little more than 10 centimeters above the ground.

Now the moment has come to build the roof. Options for its shape is a duplex or single one. Choose your taste. Remember that it is impossible to nail it to the frame to a frame, otherwise it will make it difficult to clean inside the coneers. The roof must fit tightly and at the right moment it is easy to remove from the main part of the home.

For the manufacture of the roof, any dense material that does not pass moisture is suitable. In extreme cases, it can be covered with roofing iron or slate.

You can paint the cone from outside. But for the inside the layer is suitable, which is best to fill with straw.